LIDAR: A Technology Overview and the Role of Diffuse Reflectance Targets in Testing & Calibrating Advanced Driver Assistance Systems (ADAS)
By Russell Bailey, Product Manager, Pro-Lite Technology Ltd & Greg McKee, Chief Technologist & Product Marketing Manager, Labsphere Inc
LIDAR is an established technology that is being increasingly deployed in consumer products and in driverless vehicles. LIDAR is an acronym for Light Detection and Ranging. LIDAR systems have been used for over 50 years but until recently the costs for such systems have kept them from being viable in mass market applications.
Although Radar is a popular technology used in autonomous vehicle technologies, for example in adaptive cruise control systems, LIDAR is considered the sensor of choice in driver assisted cars when it comes to accuracy of mapping positions and distances, enabling detection of small objects and 3D imaging. It uses pulsed laser and solid-state light with time of flight sensing to measure distances. Characterization of LIDAR systems requires compensating the sensor response to the pulsed laser or solid-state light levels over a broad dynamic range of reflectance levels. This in turn requires the use of large area reflectance targets of known and stable reflectance. Labsphere’s Permaflect diffuse reflectance coated targets, ranging from 5% to 94% reflectance, enable automaker OEMS and their suppliers to characterise and calibrate their LIDAR systems over a broad range of environmental conditions.
The Technology of LIDAR
The most basic form of LIDAR is the laser rangefinder which has been widely used in military applications since the 1980s. Laser rangefinders consist of a pulsed laser (emitter) and a photodetector (receiver). The rangefinder is designed to allow for distances to be accurately measured (so-called “ranging”) and they rely upon measurement of the time taken for the laser pulse to be reflected and received back at the detector (this is referred to as a “time of flight” measurement).
The rangefinder is directed at a target and a laser pulse is emitted. The laser light strikes the target, is scattered and a proportion of the reflected light is measured by the detector. As the speed of light is very precisely known, the distance between the rangefinder and the target can be measured very accurately. More advanced LIDAR systems use the same principle but use optics and moving or multiple detectors to map targets in two dimensions. These systems typically pulse thousands of times a second, allowing for thousands of points to be detected each second. Analysing the data of this point cloud creates accurate maps of the target area. The way LIDAR works is analogous to Radar and Sonar, which use radio waves and sound waves, respectively. The data from Radar and Sonar can be used to map surroundings in a similar way, but LIDAR systems employ shorter wavelength infrared radiation compared to longer wavelength radio waves. As a consequence of the shorter wavelengths used, LIDAR measurements are more accurate than Radar.
LIDAR systems that are deployed on autonomous vehicles commonly use scanning laser beams and flash technologies to measure 3D points in space relative to the sensor. These LIDAR systems are typically emitting thousands of laser pulses per second so that the vehicle can react to obstacles such as pedestrians and other vehicles. LIDAR allows autonomous vehicles to deliver and receive reflected lighting of objects and the surrounding environment with high accuracy, resolution, and long detecting distances. More advanced AI (artificial intelligence) systems are being developed to predict vehicle and pedestrian paths and react accordingly. When you combine LIDAR data with positioning information (using GPS or similar) you can comprehensively map vehicle surroundings.
LIDAR performance is strongly dependent upon the laser power and wavelength being used. For safety reasons there is an upper limit to the amount of laser power that can be used. In the absence of ever higher laser powers, you can use a higher sensitivity detector or use a laser whose wavelength extends further into the infrared (IR). Due to the technological maturity of the available lasers, the wavelengths commonly used are 850nm, 905nm, or 1550nm. 1550nm lasers are safer than the other options because above 1400nm IR radiation is no longer transmitted through the cornea of the eye and so is not focused onto the retina but require more power to compensate for much higher water absorption at 1550 nm.
LIDAR in Consumer Electronics Products and in Autonomous Vehicles
LIDAR is a key enabling technology together with camera systems and other sensors in automation applications. LIDAR systems have been used commercially for many years in specialised mapping and related applications. However, it is only in recent years that LIDAR is becoming more commonplace, driven mainly by the need for smaller and cheaper devices in autonomous automotive applications (driverless cars). LIDAR has been used in semi-autonomous vehicles as the basis for adaptive cruise control since the early 1990s, while the first demonstration of LIDAR in an autonomous vehicle was in 2005.
In the field of consumer electronics, the latest generation of Apple’s iPad Pro (and now the iPhone 12 Pro) has integrated a LIDAR sensor into its camera array specifically for imaging and augmented reality (AR) applications. The LIDAR sensor allows the iPad to correctly interpret the position of real objects with respect to an AR object as imaged by the camera array. AR is in its infancy so it remains to be seen how relevant LIDAR is on smart phones and other consumer devices, but there is a great deal of interest in AR being developed for professional applications where LIDAR can be a very useful enhancement. The applications for professional AR are diverse, from assisting warehouse workers to navigate the fastest and safest route to the required part to engineers having an overlay of the process for a complex repair. LIDAR in these applications would allow for accurate positioning and alignment, which for any application requiring precision is important.
The Role of Diffuse Reflectance Targets in Testing and Calibrating LIDAR Systems
Labsphere and Pro-Lite have been supporting the development of LIDAR systems with our diffuse reflectance targets for many years. Labsphere’s more compact Spectralon® diffuse reflectance targets are commonly used by the military for testing laser rangefinders. The accurately calibrated spectral reflectance coupled with the near Lambertian (diffuse) reflectance means that for those applications you have an accurate, repeatable target to test your system in the laboratory or in the field.
Note – If you liked this post click here to stay informed of all of the 3D laser scanning, geomatics, UAS, autonomous vehicle, Lidar News and more. If you have an informative 3D video that you would like us to promote, please forward to editor@lidarnews.com and if you would like to join the Younger Geospatial Professional movement click here.
Lidar diffuse
